 |
Keya the 3rd generation autopilot steering wheel motor, model: KY170DD01005-08G, rated Voltage is DC12V/24v, rated current is 10A, 100r, 7n.m, the power is 50w.
Advantage:Four-in-one device
(integrated servo motor, driver, encoder and reducer)
with stable running.
Low speed, high torque, good dynamic performance
and high control accuracy
Application:humanoid robots, quadruped robots,
medical, pan-tilt and collaborative robots, etc.
| Quantity: | |
|---|---|
KY170DD01005-08G
keya
This eletric motor adopts direct drive motor scheme designe, the rated speed is 100rpm, you can install it to the steering wheel shaft directly. It built in controller, support RS232, CAN control, the rated voltage is 12V, rated torque is 7N.m, the peak torque reach 13N.m, it is widely used in electric power steering system for self-driving robot tractor, it is for Forklift truck Roller and Bulldozer.
Specification
| Product name | Automatic steering wheel motor |
| Application | Forklift truck ,Roller ,Bulldozer. |
| Voltage | 12V |
| Rated torque | 7N.m |
| Peak torque | 13N.m |
| Rated current | 10A |
| Rated power | 50W |
| Rated speed | 100rpm |
| Control signal | RS232, CAN2.0 |
| Feedback | 48000ppr Incremental Encoder |
| Protection grade | IP55 |
| Weight | 8 KG |
Operating temperature: -25~55°C (based on environment temperature);
Storage temperature: -35~65°C (based on environment temperature);
Humidity: 5%--90%RH, condensation (25°C)
Protection level: IP55.
Insulation performance: input to the chassis DC600V, leakage current 0.07mA.The
insulation resistance is 20 MΩ or more.
Three-proof requirements: Meet the requirements of three defenses (dust-proof, moisture
proof, salt spray proof).
Vibration requirements: frequency 5Hz ~ 25Hz, amplitude 3mm, 0.09g.
Frequency 25Hz~200Hz, amplitude 1.47mm, 116g.
Horizontal, vertical, and longitudinal directions are 30mins in each direction.
Cooling method: natural cooling
Main Functions
Working mode: speed mode, position mode (CAN)l Feedback part: Linear encoder.
Control port: RS232, CAN
LED indicator for faults
Realize motor speed controlling and data reading through RS232
Internal temperature monitoring and protection of built-in driver
Overcurrent and overload protection
Overvoltage and undervoltage protection
Stall and over speed protection
Motor short circuit protection
Interface Definition
| 1 | IN+ | Power input + |
| 2 | IN- | Power input - |
| 3 | TX | RS232-TX |
| 4 | RX | RS232-RX |
| 5 | GND | GROUND |
| 6 | CAN-H | CAN-H |
| 7 | CAN-L | CAN-L |
if you are interested in the auto Steering Motor, please send us message freely.
Product Categories : Automatic Steering Motor
If you have any question, welcome to contect us any time.
Email: keya@jnky.com Tel: +8613255691051
Company Overview
Jinan Keya Electron Science and Technology Co., Ltd, founded in 2001, has been trading in the research &development, manufacturing and sales of DC motor and control system for 15 years.
Company set technology, talent, management and other resources advantages, to effectively integrate, has maintained a healthy, stable and rapid growth.
The company has adopted ISO9001:2015 quality management system certification, products through the CE certification. More than 3000 large and medium-sized domestic equipment manufacturers designated as supporting products, and exported to the United States, Europe, Southeast Asia and other countries.
Company Photos
Production Certification
This eletric motor adopts direct drive motor scheme designe, the rated speed is 100rpm, you can install it to the steering wheel shaft directly. It built in controller, support RS232, CAN control, the rated voltage is 12V, rated torque is 7N.m, the peak torque reach 13N.m, it is widely used in electric power steering system for self-driving robot tractor, it is for Forklift truck Roller and Bulldozer.
Specification
| Product name | Automatic steering wheel motor |
| Application | Forklift truck ,Roller ,Bulldozer. |
| Voltage | 12V |
| Rated torque | 7N.m |
| Peak torque | 13N.m |
| Rated current | 10A |
| Rated power | 50W |
| Rated speed | 100rpm |
| Control signal | RS232, CAN2.0 |
| Feedback | 48000ppr Incremental Encoder |
| Protection grade | IP55 |
| Weight | 8 KG |
Operating temperature: -25~55°C (based on environment temperature);
Storage temperature: -35~65°C (based on environment temperature);
Humidity: 5%--90%RH, condensation (25°C)
Protection level: IP55.
Insulation performance: input to the chassis DC600V, leakage current 0.07mA.The
insulation resistance is 20 MΩ or more.
Three-proof requirements: Meet the requirements of three defenses (dust-proof, moisture
proof, salt spray proof).
Vibration requirements: frequency 5Hz ~ 25Hz, amplitude 3mm, 0.09g.
Frequency 25Hz~200Hz, amplitude 1.47mm, 116g.
Horizontal, vertical, and longitudinal directions are 30mins in each direction.
Cooling method: natural cooling
Main Functions
Working mode: speed mode, position mode (CAN)l Feedback part: Linear encoder.
Control port: RS232, CAN
LED indicator for faults
Realize motor speed controlling and data reading through RS232
Internal temperature monitoring and protection of built-in driver
Overcurrent and overload protection
Overvoltage and undervoltage protection
Stall and over speed protection
Motor short circuit protection
Interface Definition
| 1 | IN+ | Power input + |
| 2 | IN- | Power input - |
| 3 | TX | RS232-TX |
| 4 | RX | RS232-RX |
| 5 | GND | GROUND |
| 6 | CAN-H | CAN-H |
| 7 | CAN-L | CAN-L |
if you are interested in the auto Steering Motor, please send us message freely.
Product Categories : Automatic Steering Motor
If you have any question, welcome to contect us any time.
Email: keya@jnky.com Tel: +8613255691051
Company Overview
Jinan Keya Electron Science and Technology Co., Ltd, founded in 2001, has been trading in the research &development, manufacturing and sales of DC motor and control system for 15 years.
Company set technology, talent, management and other resources advantages, to effectively integrate, has maintained a healthy, stable and rapid growth.
The company has adopted ISO9001:2015 quality management system certification, products through the CE certification. More than 3000 large and medium-sized domestic equipment manufacturers designated as supporting products, and exported to the United States, Europe, Southeast Asia and other countries.
Company Photos
Production Certification
